Weaving | Anping Xinjia Metal Products Co.,Ltd.

Home

Profile

Product info

Technical

Packing

Quality

Wire Mesh Weaving Patterns

Twill: Wire Cloth in which each warp wire and each shute wire passes successively over and under the two adjacent wires -- in both the warp and shute directions. This over and under movement is shifted one wire with each pass of the shuttle. This pattern permits the weaving of heavier wires in varying meshes.

Plain Dutch Weave: Similar interlacing as in Plain Weave, except the warp wires are larger diameter than the shute wires. The lighter shute wires are driven up close thus forming a dense filtering medium. This weave displays a tapered or wedge-shaped opening.

Twill Dutch: This filter cloth specification technically combines the Twill Weave and Dutch Weave described above. The larger diameter warp wires successively pass over and under the lighter diameter shute wires. Each pass of the shute wires shifts the over and under movement one wire. The shute wires are driven up close, resulting in a tightly woven filter cloth with tapered or wedge shaped openings.

Twill Dutch Double: Very similar to Twill Dutch Weave, but by proper selection of the wire sizes, the shute wires actually overlap each other when driven up tight into position. This permits double the wires per inch in the shute direction. This type of wire cloth is usually considered a Micronic Grade filter cloth.

Stranded: In this type of weave, both the warp and shute wires are made up of separate wires, rather than a single wire. This weave is woven in the twill pattern, producing an exceptionally strong and tight mesh.

Wire Mesh Product:

Stainless steel wire mesh

Stainless Steel Wire Cloth for
Screen Printing

Crimped Wire Mesh

Ultra-thin Stainless Steel Wire
Cloth

Five Heddle Weave Wire Cloth

Plain Dutch Weave Wire Cloth

Reverse Dutch Weave Wire Cloth

Twilled Dutch Weave Wire Cloth

Wire Product:

FAQ:

What is your standard of wire checking?
We check the wire according to the national standard (GB5330-85) and our enterprise regulation about raw material defects and relative solution.

What is your standard of checking finished products?
We check quality of end products according to China National Standard GB/T17492-1998, and our own standard.

Copyright © Anping Xinjia Metal Products Co.,Ltd.
ADD: Xiwangzhuang Industrial Zone,Anping County,Hebei,P.R.China. 053600 TEL:+86-318-7975131 FAX: +86-318-7020166
E-mail: sales@chinawovenmesh.com info@chinawovenmesh.comURL: http://www.chinawovenmesh.com